modm API documentation
Assertions and Abandonment

Functions

void modm_abandon (const modm::AssertionInfo &info) modm_weak
 
void modm_assert (bool condition, const char *name, const char *description, uintptr_t context=uintptr_t (-1))
 
bool modm_assert_continue_fail (bool condition, const char *name, const char *description, uintptr_t context=uintptr_t (-1))
 
bool modm_assert_continue_ignore (bool condition, const char *name, const char *description, uintptr_t context=uintptr_t (-1))
 
bool modm_assert_continue_fail_debug (bool condition, const char *name, const char *description, uintptr_t context=uintptr_t (-1))
 
bool modm_assert_continue_ignore_debug (bool condition, const char *name, const char *description, uintptr_t context=uintptr_t (-1))
 
#define MODM_ASSERTION_INFO_HAS_DESCRIPTION   0/1
 Declares whether or not AssertionInfo has a description field.
 
#define MODM_ASSERTION_HANDLER(handler)
 
#define MODM_ASSERTION_HANDLER_DEBUG(handler)
 
enum  modm::Abandonment : uint8_t { modm::Abandonment::DontCare = Bit0, modm::Abandonment::Ignore = Bit1, modm::Abandonment::Fail = Bit2, modm::Abandonment::Debug = Bit7 }
 Describes abandonment type of assertions. More...
 
using modm::AbandonmentBehavior = Flags8< Abandonment >
 
using modm::AssertionHandler = Abandonment (*)(const AssertionInfo &info)
 Signature of the assertion handlers.
 

Detailed Description

lbuild module: modm:architecture:assert

This module provides a way to define and report assertions, that act as a low-cost replacement for C++ exceptions and as a low-cost customization point for errors raised in asynchronous code.

Assertions are called with or without a context:

They have the following arguments:

    >
  1. bool condition: The assertion fails when this condition evaluated to false.
  2. const char *name: A short and unique assertion name.
  3. const char *description: A detailed description of the failure.
  4. uintptr_t context = -1: Optional context.

The condition is evaluated at most once by a (C-style) cast to bool.

The name format is not enforced, however, it is recommended to either use what for top-level failures, like malloc for heap troubles, or scope.what for failures that may not be unique, like can.rx vs. uart.rx for when their respective receive buffers overflow.

The description can be as detailed as necessary, since it is only included in the firmware if the with_description option is set to true, which also defines MODM_ASSERTION_INFO_HAS_DESCRIPTION to 1 or 0. You can either find the detailed description in your code via its name, or if you prefer a stand-alone solution and your target has enough memory, include all strings in your binary.

The context is of pointer size, and anything passed to it is cast to uintptr_t. Otherwise all bits are set via uintptr_t(-1).

Assertions are implemented as macros and expand to this pseudo-code equivalent:

void modm_assert(bool condition, const char *name, const char *description,
uintptr_t context=uintptr_t(-1))
{
if (not condition)
{
modm::AssertionInfo info{name, description, context};
modm_assert_report(info);
// Unreachable code
}
}
Note
Assertions can be used in both C and C++ code.

If you like to know the technical details, you can read here about the original assertions in xpcc.

Assertion Handlers

Assertions may also be recoverable if the call site allows for it. For example if the CAN receive buffer overflows, you may want to simply discard the input. If malloc fails to allocate it just returns NULL and the caller is responsible to deal with that. But maybe you want to enable an additional assertion in debug mode just to double-check.

When an assertion fails, the runtime calls any number of user-defined handlers, registered using MODM_ASSERTION_HANDLER(handler). The handlers must return a modm::Abandonment value, specifying whether they want to continue with the execution with Abandonment::Ignore, or abandon execution with Abandonment::Fail leading to a call to modm_abandon(info), or delegate the decision with Abandonment::DontCare.

For example, this neutral handler logs the failed assertion's name, but delegates all further decisions to others:

log_assertion(const modm::AssertionInfo &info)
{
MODM_LOG_ERROR.printf("Assertion '%s' raised!\n", info.name);
return Abandonment::DontCare;
}
// Register handler for all builds
MODM_ASSERTION_HANDLER(log_assertion);
// Or register only for debug builds

You may register specialized handlers anywhere in your code, for example for ignoring the mentioned CAN receive buffer overflow in your connectivity code:

ignore_can_rx_handler(const modm::AssertionInfo &info)
{
if (info.name == "can.rx"s) {
// Only silently ignore this specific assertion!
return Abandonment::Ignore;
}
return Abandonment::DontCare;
}
MODM_ASSERTION_HANDLER(ignore_can_rx_handler);

You may define any number of handlers, which are called in random order by the runtime and their results are accumulated as follows:

    >
  1. If at least one handler returns Abandonment::Fail execution abandons.
  2. Otherwise if any handler returns Abandonment::Ignore execution resumes.
  3. Otherwise if no handlers are registered or all handlers return Abandonment::DontCare, the assertion type determines the outcome.
Note
Handler execution order is undefined. The order of handler execution is undefined and must not be relied upon for any functionality!
Warning
Assertions and handlers are not reentrant! Assertions may fail in an interrupt context, thus calling handlers in that context too. Since handlers may make use of interrupts themselves (for logging via UART) assertions are not atomically scoped by default. You may however use a modm::atomic::Lock inside your assertion handler.
Handlers may be called inside high-priority interrupts! This is problematic when relying on interrupts still working inside handlers for example for logging the failure via UART. Be aware of this and make sure you do not inadvertently block inside handlers.

Assertion Types

The call site of the assertion decides whether an assertion can be recovered from or not. For example, if the CAN receive buffer has overflowed, but execution continues, then code to discard the message must be in place.

In case no handlers are registered or they all delegate the abandonment decision away, the call site must decide what the default behavior is. For this purpose the following assertions are available:

    >
  1. void modm_assert(): Always abandons execution when failed.
  2. bool modm_assert_continue_fail(): Abandons execution unless overwritten.
  3. bool modm_assert_continue_ignore(): Resumes execution unless overwritten.

Assertions that can resume execution return the evaluated boolean condition to be used to branch to cleanup code:

// Can be done inline in any flow control statement
if (not modm_assert_continue_fail(condition, ...)) {
// cleanup code
}
// Or saved in a variable and queried multiple times.
const bool cleanup = not modm_assert_continue_ignore(condition, ...);
if (cleanup) {
// cleanup code part 1
}
// other code
if (cleanup) {
// cleanup code part 1
}
// or if cleanup is require *before* assertion is called
const bool is_ok = (condition);
if (not is_ok) {
// pre-assert cleanup
}
if (not is_ok) {
// post-assert cleanup
}

Additionally, these assertions are only active in profile=debug (more about profiles: scons, make). Of course they still evaluate and return the condition in profile=release, so you can use them just as above:

    >
  1. bool modm_assert_continue_fail_debug()
  2. bool modm_assert_continue_ignore_debug()

Alternatively, you can guard the entire assertion statement with the MODM_BUILD_DEBUG macro if you only want to execute the check and branch in debug profile:

// The check is always performed, but only raises an assertion in debug profile!
{
// if the check fails, this branch is executed in release profile too!
}
#ifdef MODM_DEBUG_BUILD
// This check if only performed in debug profile
if (not modm_assert_continue_ignore(cond, ...))
{
// if the check fails, this branch is executed only in debug profile!
}
#endif

When to use what?

Here are some guidelines for choosing the best assertion type:

    >
  1. Prefer to report errors via return types whenever possible!
  2. If no sane recovery is possible, use modm_assert().
  3. If there is a (sensible) fallback for the failure, use modm_assert_continue_{fail|ignore}(): a. Abort by default, if the failure runs contrary to expected behavior. b. Resume by default, if the failure is expected and its behavior is well documented.
  4. If the failure is expected and communicated via the normal API, or it only occurs rarely or through a clear misuse of the API, use modm_assert_continue_{fail|ignore}_debug().

Let's illustrate these with a few examples:

    >
  1. libc exit() is called. There is no sensible fallback, since there is no operating system to return control back to, so use modm_assert().
  2. An interrupt without a user-defined handler is triggered. The developer most likely enabled the wrong interrupt or provided the wrong handler. A sensible fallback is to disable the interrupt from triggering again and to alert the developer with modm_assert_continue_fail(..., irq_number).
  3. The CAN receive buffer overflows. A sensible fallback is to discard the message, which is documented as the expected behavior. Since this occurs asynchronously inside the CAN RX interrupt, there is no way to return an error code, so call modm_assert_continue_ignore(..., &message) with a pointer to the message to inform the developer.
  4. malloc fails to due to heap exhaustion and returns NULL, delegating the fallback implementation to the caller. Since the typical callers of malloc are known for not checking for NULL, using modm_assert_continue_fail_debug() here is warranted, helping the developer find potential issues faster, and then ignoring this assert for debug builds by registering a handler via MODM_ASSERTION_HANDLER_DEBUG().
  5. An I2C transfer failure is detected inside an interrupt. Such failures are expected on busses and typically the transfers are simply retried. You can use modm_assert_continue_ignore_debug() to give the developer a way to log the failure frequency without having to provide a special API. This can help diagnose a problem perhaps with the bus connection faster.

Abandoning execution

If execution is abandoned modm_abandon(const AssertionInfo &info) is called, which is a weak and empty function by default.

The function is meant to be overwritten by the application on embedded targets for example to disable relevant hardware for safety, log the failure via UART and perhaps blink some LEDs wildly to get the user's attention.

After returning from that function, the runtime resets the chip on Cortex-M, or loops forever on AVR, or calls abort() on hosted. You may of course, implement your own abandoning behavior instead of returning from modm_abandon().

Warning
modm_abandon() may be called inside high-priority interrupts! You can try to lower the active IRQ priority to let UART work, however, in the worst case you're called from within the HardFault or even NMI handlers which have the highest fixed priority.

Module Options

modm:architecture:assert:with_description: Include assertion description

Places the full description of a modm_assert() into the firmware image instead of only into the ELF file. This makes printing assertion information a simple standalone feature, fully independent of any additional script for decoding logging output, however, it may increase binary size considerably!

Generated with: debug in [debug, off, release]

Macro Definition Documentation

#define MODM_ASSERTION_HANDLER

This adds a function to the list of assertion handlers to execute on assertion failure. Note that this macro does not give you any influence over the order of handler execution on assertion failure. Do not write assertion handlers that depend on any ordered execution!

Parameters
handlerA function of signature AssertionHandler.
#define MODM_ASSERTION_HANDLER_DEBUG

This adds an assertion handler only for debug mode.

Parameters
handlerA function of signature AssertionHandler.

Enumeration Type Documentation

enum modm::Abandonment : uint8_t
strong

Describes abandonment type of assertions.

Enum ValuesDocumentation
DontCare 

Do not care about failure.

Ignore 

Ignore this failure.

Fail 

This failure is reason for abandonment.

Debug 

Only set for a debug-only failure.

Function Documentation

void modm_abandon ( const modm::AssertionInfo info)

Overwriteable abandonment handler for all targets.

You should overwrite this handler for custom failure behaviour like blinking LEDs and logging the failure via a serial connection.

void modm_assert ( bool  condition,
const char *  name,
const char *  description,
uintptr_t  context = uintptr_t (-1) 
)

Always abandons execution

Note
This assert is included in all builds!
bool modm_assert_continue_fail ( bool  condition,
const char *  name,
const char *  description,
uintptr_t  context = uintptr_t (-1) 
)

Abandons execution, unless overwritten by assertion handlers to resume.

Returns
result of condition evaluation
Note
This assert is included in all builds!
bool modm_assert_continue_fail_debug ( bool  condition,
const char *  name,
const char *  description,
uintptr_t  context = uintptr_t (-1) 
)

Abandons execution, unless overwritten by assertion handlers to resume.

Note
This assert is only included debug builds, however the condition is still executed and the result is returned!
Returns
result of condition evaluation
bool modm_assert_continue_ignore ( bool  condition,
const char *  name,
const char *  description,
uintptr_t  context = uintptr_t (-1) 
)

Resumes execution, unless overwritten by assertion handlers to abandon.

Returns
result of condition evaluation
Note
This assert is included in all builds!
bool modm_assert_continue_ignore_debug ( bool  condition,
const char *  name,
const char *  description,
uintptr_t  context = uintptr_t (-1) 
)

Resumes execution, unless overwritten by assertion handlers to abandon.

Note
This assert is only included debug builds, however the condition is still executed and the result is returned!
Returns
result of condition evaluation