#include <modm/platform/adc/adc_5.hpp>

Inheritance diagram for modm::platform::Adc5:

Classes
struct	SequenceChannel

Public Types
enum	Channel : uint8_t { Channel1 = 1, Channel2 = 2, Channel6 = 6, Channel7 = 7, Channel8 = 8, Channel9 = 9, Channel10 = 10, Channel11 = 11, Channel12 = 12, Channel13 = 13, Channel14 = 14, Channel15 = 15, Channel16 = 16, Opamp5 = 3, Temperature = 4, Opamp4 = 5, BatDiv3 = 17, InternalReference = 18 }
	Channels, which can be used with this ADC.

enum	ClockMode : uint32_t { DoNotChange = 0xff, Asynchronous = 0, SynchronousPrescaler1 = ADC_CCR_CKMODE_0, SynchronousPrescaler2 = ADC_CCR_CKMODE_1, SynchronousPrescaler4 = ADC_CCR_CKMODE_1 \| ADC_CCR_CKMODE_0 }

enum	ClockSource : uint32_t { NoClock = 0, Pll = RCC_CCIPR_ADC345SEL_0, SystemClock = RCC_CCIPR_ADC345SEL_1 }

enum	Prescaler : uint32_t { Disabled = 0, Div1 = 0, Div2 = ADC_CCR_PRESC_0, Div4 = ADC_CCR_PRESC_1, Div6 = ADC_CCR_PRESC_1 \| ADC_CCR_PRESC_0, Div8 = ADC_CCR_PRESC_2, Div10 = ADC_CCR_PRESC_2 \| ADC_CCR_PRESC_0, Div12 = ADC_CCR_PRESC_2 \| ADC_CCR_PRESC_1, Div16 = ADC_CCR_PRESC_2 \| ADC_CCR_PRESC_1 \| ADC_CCR_PRESC_0, Div32 = ADC_CCR_PRESC_3, Div64 = ADC_CCR_PRESC_3 \| ADC_CCR_PRESC_0, Div128 = ADC_CCR_PRESC_3 \| ADC_CCR_PRESC_1, Div256 = ADC_CCR_PRESC_3 \| ADC_CCR_PRESC_1 \| ADC_CCR_PRESC_0, Div256AllBits = ADC_CCR_PRESC_3 \| ADC_CCR_PRESC_2 \| ADC_CCR_PRESC_1 \| ADC_CCR_PRESC_0 }

enum	SampleTime : uint8_t { Cycles2 = 0b000, Cycles7 = 0b001, Cycles13 = 0b010, Cycles25 = 0b011, Cycles48 = 0b100, Cycles93 = 0b101, Cycles248 = 0b110, Cycles641 = 0b111 }

enum	CalibrationMode : uint32_t { SingleEndedInputsMode = 0, DifferntialInputsMode = ADC_CR_ADCALDIF, DoNotCalibrate = 0xff }

enum	VoltageRegulatorState : uint32_t { Enabled = ADC_CR_ADVREGEN }

enum	DmaMode : uint32_t { Disabled = 0, OneShot = ADC_CFGR_DMAEN, Circular = ADC_CFGR_DMACFG \| ADC_CFGR_DMAEN, Mask = Circular }

enum	Interrupt : uint32_t { Ready = ADC_IER_ADRDYIE, EndOfSampling = ADC_IER_EOSMPIE, EndOfRegularConversion = ADC_IER_EOCIE, EndOfRegularSequenceOfConversions = ADC_IER_EOSIE, Overrun = ADC_IER_OVRIE, EndOfInjectedConversion = ADC_IER_JEOCIE, EndOfInjectedSequenceOfConversions = ADC_IER_JEOSIE, AnalogWatchdog1 = ADC_IER_AWD1IE, AnalogWatchdog2 = ADC_IER_AWD2IE, AnalogWatchdog3 = ADC_IER_AWD3IE, InjectedContextQueueOverflow = ADC_IER_JQOVFIE }

enum	InterruptFlag : uint32_t { Ready = ADC_ISR_ADRDY, EndOfSampling = ADC_ISR_EOSMP, EndOfRegularConversion = ADC_ISR_EOC, EndOfRegularSequenceOfConversions = ADC_ISR_EOS, Overrun = ADC_ISR_OVR, EndOfInjectedConversion = ADC_ISR_JEOC, EndOfInjectedSequenceOfConversions = ADC_ISR_JEOS, AnalogWatchdog1 = ADC_ISR_AWD1, AnalogWatchdog2 = ADC_ISR_AWD2, AnalogWatchdog3 = ADC_ISR_AWD3, InjectedContextQueueOverflow = ADC_ISR_JQOVF, All = ADC_ISR_ADRDY \| ADC_ISR_EOSMP \| ADC_ISR_EOC \| ADC_ISR_EOS \| ADC_ISR_OVR \| ADC_ISR_JEOC \| ADC_ISR_JEOS \| ADC_ISR_AWD1 \| ADC_ISR_AWD2 \| ADC_ISR_AWD3 \| ADC_ISR_JQOVF }

Public Member Functions
	MODM_FLAGS32 (Interrupt)

	MODM_FLAGS32 (InterruptFlag)

Static Public Member Functions
template<class... Signals>
static void	connect ()

static void	initialize (const ClockMode clk=ClockMode::DoNotChange, const ClockSource clk_src=ClockSource::SystemClock, const Prescaler pre=Prescaler::Disabled, const CalibrationMode cal=CalibrationMode::DoNotCalibrate, const bool blocking=true)

static void	disable (const bool blocking=true)

static void	setPrescaler (const Prescaler pre)

static bool	isReady ()

static void	calibrate (const CalibrationMode mode, const bool blocking=true)

static void	setLeftAdjustResult (const bool enable)

static bool	setChannel (const Channel channel, const SampleTime sampleTime=static_cast< SampleTime >(0b000))

static bool	setChannelSequence (std::span< const SequenceChannel > sequence)

template<class Gpio >
static bool	setPinChannel (SampleTime sampleTime=static_cast< SampleTime >(0b000))
	Setting the channel for a Pin.

template<class Gpio >
static constexpr Channel	getPinChannel ()
	Get the channel for a Pin.

static void	setFreeRunningMode (const bool enable)

static void	startConversion ()

static void	stopConversion ()

static bool	isConversionFinished ()

static bool	isConversionSequenceFinished ()

static void	startInjectedConversionSequence ()

static bool	setInjectedConversionChannel (uint8_t index, Channel channel, SampleTime sampleTime)

template<class Gpio >
static bool	setInjectedConversionChannel (uint8_t index, SampleTime sampleTime)

static bool	setInjectedConversionSequenceLength (uint8_t length)

static bool	isInjectedConversionFinished ()

static auto	getValue ()

static auto	getInjectedConversionValue (uint8_t index)

static void	enableInterruptVector (const uint32_t priority, const bool enable=true)

static void	enableInterrupt (const Interrupt_t interrupt)

static void	disableInterrupt (const Interrupt_t interrupt)

static InterruptFlag_t	getInterruptFlags ()

static void	acknowledgeInterruptFlags (const InterruptFlag_t flags)

static volatile uint32_t *	dataRegister ()

static void	setDmaMode (DmaMode mode)

Static Public Attributes
static constexpr uint8_t	Resolution = 12

Detailed Description

Analog/Digital-Converter module (ADC5).

The 12-bit ADC is a successive approximation analog-to-digital converter. It has up to 19 multiplexed channels allowing it measure signals from 16 external and three internal sources. The result of the ADC is stored in a left-aligned or right-aligned 16-bit data register.

This API is designed for the internal ADCs of STM32F30X/STM32F31X

Author: Kevin Laeufer; Sascha Schade (strongly-typed)

Member Function Documentation

static volatile uint32_t* modm::platform::Adc5::dataRegister ( )

inlinestatic

Returns: ADC data register pointer, for DMA use only.

static auto modm::platform::Adc5::getInjectedConversionValue ( uint8_t index )

inlinestatic

Get result of injected conversion.

Precondition: The injected conversion sequence is completed.

static auto modm::platform::Adc5::getValue ( )

inlinestatic

Returns: The most recent result of the ADC conversion.

Precondition: A conversion should have been started with startConversion()

To have a blocking GET you might do it this way:

while(!isConversionFinished())
{
   // Waiting for conversion
}

static void modm::platform::Adc5::initialize	(	const ClockMode	clk = `ClockMode::DoNotChange`,
		const ClockSource	clk_src = `ClockSource::SystemClock`,
		const Prescaler	pre = `Prescaler::Disabled`,
		const CalibrationMode	cal = `CalibrationMode::DoNotCalibrate`,
		const bool	blocking = `true`
	)

inlinestatic

Initialize and enable the A/D converter.

Enables the ADC clock and switches on the ADC. The ADC clock prescaler will be set as well.

The ADC can be clocked

Parameters

clk	Clock Mode for ADC1/ADC2 or ADC3/ADC4. Set to ClockMode::DoNotChange or leave blank if you want to leave this setting untouched.
pre	The prescaler for the asynchronous ADC clock. This parameter is only taken into account if clk == ClockMode::Asynchronous.

static bool modm::platform::Adc5::isConversionFinished ( )

inlinestatic

Returns: If the conversion is finished.

Precondition: A conversion should have been started with startConversion()

static bool modm::platform::Adc5::isInjectedConversionFinished ( )

inlinestatic

Returns: If the injected conversion sequence is finished.

Precondition: An injected conversion should have been started with startInjectedConversionSequence()

static bool modm::platform::Adc5::isReady ( )

inlinestatic

Returns true if the ADRDY bit of the ISR is set

static bool modm::platform::Adc5::setChannel	(	const Channel	channel,
		const SampleTime	sampleTime = `static_cast< SampleTime >(0b000)`
	)

inlinestatic

Analog channel selection.

This not for scan mode. The number of channels will be set to 1, the channel selected and the corresponding pin will be set to analog input. If the the channel is modified during a conversion, the current conversion is reset and a new start pulse is sent to the ADC to convert the new chosen channnel / group of channels.

Parameters

channel	The channel which shall be read.
sampleTime	The sample time to sample the input voltage.

Precondition: The ADC clock must be started and the ADC switched on with initialize()

static void modm::platform::Adc5::setFreeRunningMode ( const bool enable )

inlinestatic

Enables free running mode

The ADC will continously start conversions and provide the most recent result in the ADC register.

Precondition: The ADC clock must be started and the ADC switched on with initialize()

static bool modm::platform::Adc5::setInjectedConversionChannel	(	uint8_t	index,
		Channel	channel,
		SampleTime	sampleTime
	)

inlinestatic

index Index of injected conversion in sequence (0..3)
Returns
true if configuration is successful, false if arguments are invalid

template<class Gpio >

static bool modm::platform::Adc5::setInjectedConversionChannel	(	uint8_t	index,
		SampleTime	sampleTime
	)

inlinestatic

index Index of injected conversion in sequence (0..3)
Returns
true if configuration is successful, false if arguments are invalid

static bool modm::platform::Adc5::setInjectedConversionSequenceLength ( uint8_t length )

inlinestatic

length Length of injected conversion sequence (1..4)
Returns
true if configuration is successful, false if arguments are invalid

static void modm::platform::Adc5::setLeftAdjustResult ( const bool enable )

inlinestatic

Change the presentation of the ADC conversion result.

Parameters

enable Set to true to left adjust the result. Otherwise, the result is right adjusted.

Precondition: The ADC clock must be started and the ADC switched on with initialize()

static void modm::platform::Adc5::setPrescaler ( const Prescaler pre )

inlinestatic

Select the frequency of the clock to the ADC. The clock is common for ADC1/ADC2 and ADC3/ADC4.

Precondition: The PLL must be running.

Parameters

prescaler The prescaler specifies by which factor the system clock will be divided.

static void modm::platform::Adc5::startConversion ( )

inlinestatic

Start a new conversion or continuous conversions.

Precondition: A ADC channel must be selected with setChannel().

Postcondition: The result can be fetched with getValue()

TODO: is there any limitation to when is can be called??

static void modm::platform::Adc5::startInjectedConversionSequence ( )

inlinestatic

Start a new injected conversion sequence.

Precondition: Channels must be selected with setInjectedConversionChannel().

The documentation for this class was generated from the following file:

adc_5.hpp

Classes

Public Types

Public Member Functions

Static Public Member Functions

Static Public Attributes

Detailed Description

Member Function Documentation