modm API documentation
Public Typedefs | Public Types | Public Member Functions | Static Public Member Functions | Static Protected Attributes | List of all members
modm::platform::Dma1 Class Reference
Platform HAL » Direct Memory Access (DMA)
Inheritance diagram for modm::platform::Dma1:
modm::platform::DmaController< 1 > modm::platform::DmaBase

Public Typedefs

using Channel0 = DmaController< 1 >::Channel< DmaBase::Channel::Channel0 >
 
using Channel1 = DmaController< 1 >::Channel< DmaBase::Channel::Channel1 >
 
using Channel2 = DmaController< 1 >::Channel< DmaBase::Channel::Channel2 >
 
using Channel3 = DmaController< 1 >::Channel< DmaBase::Channel::Channel3 >
 
using Channel4 = DmaController< 1 >::Channel< DmaBase::Channel::Channel4 >
 
using Channel5 = DmaController< 1 >::Channel< DmaBase::Channel::Channel5 >
 
using Channel6 = DmaController< 1 >::Channel< DmaBase::Channel::Channel6 >
 
using Channel7 = DmaController< 1 >::Channel< DmaBase::Channel::Channel7 >
 
using IrqHandler = void (*)(void)
 

Public Types

enum  Channel {
  Stream0 = 0, Stream1, Stream2, Stream3,
  Stream4, Stream5, Stream6, Stream7,
  Channel0 = Stream0, Channel1 = Stream1, Channel2 = Stream2, Channel3 = Stream3,
  Channel4 = Stream4, Channel5 = Stream5, Channel6 = Stream6, Channel7 = Stream7
}
 
enum  CircularMode : uint32_t { Disabled = 0, CircularMode::Enabled = DMA_SxCR_CIRC }
 
enum  DataTransferDirection : uint32_t { DataTransferDirection::PeripheralToMemory = 0, DataTransferDirection::MemoryToPeripheral = DMA_SxCR_DIR_0, DataTransferDirection::MemoryToMemory = DMA_SxCR_DIR_1 }
 
enum  InterruptEnable : uint32_t { DirectModeError = DMA_SxCR_DMEIE, TransferError = DMA_SxCR_TEIE, HalfTransfer = DMA_SxCR_HTIE, TransferComplete = DMA_SxCR_TCIE }
 
enum  InterruptFlags : uint8_t {
  FifoError = 0b00'0001, DirectModeError = 0b00'0100, Error = 0b00'1000, HalfTransferComplete = 0b01'0000,
  TransferComplete = 0b10'0000, All = 0b11'1101, Global = All
}
 
enum  MemoryDataSize : uint32_t {
  Byte = 0, Bit8 = Byte, HalfWord = DMA_SxCR_MSIZE_0, Bit16 = HalfWord,
  Word = DMA_SxCR_MSIZE_1, Bit32 = Word
}
 
enum  MemoryIncrementMode : uint32_t { Fixed = 0, MemoryIncrementMode::Increment = DMA_SxCR_MINC }
 
enum  PeripheralDataSize : uint32_t {
  Byte = 0, Bit8 = Byte, HalfWord = DMA_SxCR_PSIZE_0, Bit16 = HalfWord,
  Word = DMA_SxCR_PSIZE_1, Bit32 = Word
}
 
enum  PeripheralIncrementMode : uint32_t { Fixed = 0, PeripheralIncrementMode::Increment = DMA_SxCR_PINC }
 
enum  Priority : uint32_t { Low = 0, Medium = DMA_SxCR_PL_0, High = DMA_SxCR_PL_1, VeryHigh = DMA_SxCR_PL_1 | DMA_SxCR_PL_0 }
 
enum  Request : uint32_t {
  Channel0 = (0 << DMA_SxCR_CHSEL_Pos), Channel1 = (1 << DMA_SxCR_CHSEL_Pos), Channel2 = (2 << DMA_SxCR_CHSEL_Pos), Channel3 = (3 << DMA_SxCR_CHSEL_Pos),
  Channel4 = (4 << DMA_SxCR_CHSEL_Pos), Channel5 = (5 << DMA_SxCR_CHSEL_Pos), Channel6 = (6 << DMA_SxCR_CHSEL_Pos), Channel7 = (7 << DMA_SxCR_CHSEL_Pos),
  Channel8 = (8 << DMA_SxCR_CHSEL_Pos), Channel9 = (9 << DMA_SxCR_CHSEL_Pos), Channel10 = (10 << DMA_SxCR_CHSEL_Pos), Channel11 = (11 << DMA_SxCR_CHSEL_Pos)
}
 
enum  Signal : uint8_t {
  NoSignal, A, B, Ch1,
  Ch2, Ch3, Ch4, Com,
  Cs, Dac1, Dac2, Dt,
  Rx, Trig, Tx, Up
}
 

Public Member Functions

 MODM_FLAGS32 (InterruptEnable)
 
 MODM_FLAGS32 (InterruptFlags)
 

Static Public Member Functions

static void disable ()
 
static void enable ()
 

Static Protected Attributes

static constexpr uint32_t configmask
 
static constexpr uint32_t memoryMask
 
static constexpr uint32_t peripheralMask
 

Member Enumeration Documentation

enum modm::platform::DmaBase::CircularMode : uint32_t
inheritedstrong
Enum ValuesDocumentation
Enabled 

circular mode

enum modm::platform::DmaBase::DataTransferDirection : uint32_t
inheritedstrong
Enum ValuesDocumentation
PeripheralToMemory 

Source: DMA_SxPAR; Sink: DMA_SxM0AR.

MemoryToPeripheral 

Source: DMA_SxM0AR; Sink: DMA_SxPAR.

MemoryToMemory 

Source: DMA_SxPAR; Sink: DMA_SxM0AR.

enum modm::platform::DmaBase::MemoryDataSize : uint32_t
inheritedstrong

In direct mode (if the FIFO is not used) MSIZE is forced by hardware to the same value as PSIZE

enum modm::platform::DmaBase::MemoryIncrementMode : uint32_t
inheritedstrong
Enum ValuesDocumentation
Increment 

incremented according to MemoryDataSize

enum modm::platform::DmaBase::PeripheralIncrementMode : uint32_t
inheritedstrong
Enum ValuesDocumentation
Increment 

incremented according to PeripheralDataSize

enum modm::platform::DmaBase::Signal : uint8_t
inheritedstrong

Peripheral signals that can be used in DMA channels

Member Function Documentation

static void modm::platform::DmaController< ID >::disable ( )
inheritedinlinestatic

Disable the DMA controller in the RCC

static void modm::platform::DmaController< ID >::enable ( )
inheritedinlinestatic

Enable the DMA controller in the RCC

Member Data Documentation

constexpr uint32_t modm::platform::DmaBase::configmask
inheritedstaticprotectedconstexpr
Initial value:
DMA_SxCR_CHSEL_Msk |
DMA_SxCR_PL_Msk |
DMA_SxCR_CIRC_Msk |
DMA_SxCR_PFCTRL_Msk
constexpr uint32_t modm::platform::DmaBase::memoryMask
inheritedstaticprotectedconstexpr
Initial value:
DMA_SxCR_MBURST_Msk |
DMA_SxCR_MSIZE_Msk |
DMA_SxCR_MINC |
DMA_SxCR_DIR_Msk
constexpr uint32_t modm::platform::DmaBase::peripheralMask
inheritedstaticprotectedconstexpr
Initial value:
DMA_SxCR_PBURST_Msk |
DMA_SxCR_PSIZE_Msk |
DMA_SxCR_PINC_Msk |
DMA_SxCR_DIR_Msk
The documentation for this class was generated from the following file: