modm API documentation
|
#include <modm/platform/dma/dma_base.hpp>
Classes | |
struct | Nvic |
struct | Nvic< 1 > |
struct | Nvic< 2 > |
Public Typedefs | |
using | IrqHandler = void (*)(void) |
Public Types | |
enum | Channel { Stream0 = 0, Stream1, Stream2, Stream3, Stream4, Stream5, Stream6, Stream7, Channel0 = Stream0, Channel1 = Stream1, Channel2 = Stream2, Channel3 = Stream3, Channel4 = Stream4, Channel5 = Stream5, Channel6 = Stream6, Channel7 = Stream7 } |
enum | Request : uint32_t { Channel0 = (0 << DMA_SxCR_CHSEL_Pos), Channel1 = (1 << DMA_SxCR_CHSEL_Pos), Channel2 = (2 << DMA_SxCR_CHSEL_Pos), Channel3 = (3 << DMA_SxCR_CHSEL_Pos), Channel4 = (4 << DMA_SxCR_CHSEL_Pos), Channel5 = (5 << DMA_SxCR_CHSEL_Pos), Channel6 = (6 << DMA_SxCR_CHSEL_Pos), Channel7 = (7 << DMA_SxCR_CHSEL_Pos) } |
enum | Priority : uint32_t { Low = 0, Medium = DMA_SxCR_PL_0, High = DMA_SxCR_PL_1, VeryHigh = DMA_SxCR_PL_1 | DMA_SxCR_PL_0 } |
enum | MemoryDataSize : uint32_t { Byte = 0, Bit8 = Byte, HalfWord = DMA_SxCR_MSIZE_0, Bit16 = HalfWord, Word = DMA_SxCR_MSIZE_1, Bit32 = Word } |
enum | PeripheralDataSize : uint32_t { Byte = 0, Bit8 = Byte, HalfWord = DMA_SxCR_PSIZE_0, Bit16 = HalfWord, Word = DMA_SxCR_PSIZE_1, Bit32 = Word } |
enum | MemoryIncrementMode : uint32_t { Fixed = 0, MemoryIncrementMode::Increment = DMA_SxCR_MINC } |
enum | PeripheralIncrementMode : uint32_t { Fixed = 0, PeripheralIncrementMode::Increment = DMA_SxCR_PINC } |
enum | CircularMode : uint32_t { Disabled = 0, CircularMode::Enabled = DMA_SxCR_CIRC } |
enum | DataTransferDirection : uint32_t { DataTransferDirection::PeripheralToMemory = 0, DataTransferDirection::MemoryToPeripheral = DMA_SxCR_DIR_0, DataTransferDirection::MemoryToMemory = DMA_SxCR_DIR_1 } |
enum | Signal : uint8_t { NoSignal, A, B, Ch1, Ch2, Ch3, Ch4, Com, Dac1, Dac2, Ext_rx, Ext_tx, In, Out, Rx, Trig, Tx, Up } |
enum | InterruptEnable : uint32_t { DirectModeError = DMA_SxCR_DMEIE, TransferError = DMA_SxCR_TEIE, HalfTransfer = DMA_SxCR_HTIE, TransferComplete = DMA_SxCR_TCIE } |
enum | InterruptFlags : uint8_t { FifoError = 0b00'0001, DirectModeError = 0b00'0100, Error = 0b00'1000, HalfTransferComplete = 0b01'0000, TransferComplete = 0b10'0000, All = 0b11'1101, Global = All } |
Public Member Functions | |
MODM_FLAGS32 (InterruptEnable) | |
MODM_FLAGS32 (InterruptFlags) | |
Static Protected Attributes | |
static constexpr uint32_t | memoryMask |
static constexpr uint32_t | peripheralMask |
static constexpr uint32_t | configmask |
DMA
|
strong |
|
strong |
|
strong |
In direct mode (if the FIFO is not used) MSIZE is forced by hardware to the same value as PSIZE
|
strong |
Enum Values | Documentation |
---|---|
Increment | incremented according to MemoryDataSize |
|
strong |
|
strong |
Peripheral signals that can be used in DMA channels
|
staticprotectedconstexpr |
|
staticprotectedconstexpr |
|
staticprotectedconstexpr |