modm API documentation
Classes | Public Typedefs | Public Types | Public Member Functions | Static Protected Attributes | List of all members
modm::platform::DmaBase Class Reference
Platform HAL » Direct Memory Access (DMA)

#include <modm/platform/dma/dma_base.hpp>

Inheritance diagram for modm::platform::DmaBase:
modm::platform::DmaController< 1 > modm::platform::DmaChannelHal< ChannelID, CHANNEL_BASE > modm::platform::DmaController< ID > modm::platform::DmaController< ID >::Channel modm::platform::DmaHal< ID > modm::platform::Dma1

Classes

struct  Nvic
 
struct  Nvic< 1 >
 

Public Typedefs

using IrqHandler = void (*)(void)
 

Public Types

enum  Channel {
  Channel1 = 0, Channel2, Channel3, Channel4,
  Channel5
}
 
enum  Request { Any }
 
enum  Priority : uint32_t { Low = 0, Medium = DMA_CCR_PL_0, High = DMA_CCR_PL_1, VeryHigh = DMA_CCR_PL_1 | DMA_CCR_PL_0 }
 
enum  MemoryDataSize : uint32_t {
  Byte = 0, Bit8 = Byte, HalfWord = DMA_CCR_MSIZE_0, Bit16 = HalfWord,
  Word = DMA_CCR_MSIZE_1, Bit32 = Word
}
 
enum  PeripheralDataSize : uint32_t {
  Byte = 0, Bit8 = Byte, HalfWord = DMA_CCR_PSIZE_0, Bit16 = HalfWord,
  Word = DMA_CCR_PSIZE_1, Bit32 = Word
}
 
enum  MemoryIncrementMode : uint32_t { Fixed = 0, MemoryIncrementMode::Increment = DMA_CCR_MINC }
 
enum  PeripheralIncrementMode : uint32_t { Fixed = 0, PeripheralIncrementMode::Increment = DMA_CCR_PINC }
 
enum  CircularMode : uint32_t { Disabled = 0, CircularMode::Enabled = DMA_CCR_CIRC }
 
enum  DataTransferDirection : uint32_t { DataTransferDirection::PeripheralToMemory = 0, DataTransferDirection::MemoryToPeripheral = DMA_CCR_DIR, DataTransferDirection::MemoryToMemory = DMA_CCR_MEM2MEM }
 
enum  Signal : uint8_t {
  NoSignal, Ch1, Ch2, Ch3,
  Ch4, Com, Rx, Trig,
  Tx, Up
}
 
enum  InterruptEnable : uint32_t { TransferComplete = DMA_CCR_TCIE, HalfTransfer = DMA_CCR_HTIE, TransferError = DMA_CCR_TEIE }
 
enum  InterruptFlags : uint8_t {
  Global = 0b0001, TransferComplete = 0b0010, HalfTransferComplete = 0b0100, Error = 0b1000,
  All = 0b1111
}
 

Public Member Functions

 MODM_FLAGS32 (InterruptEnable)
 
 MODM_FLAGS32 (InterruptFlags)
 

Static Protected Attributes

static constexpr uint32_t memoryMask
 
static constexpr uint32_t peripheralMask
 
static constexpr uint32_t configmask
 

Detailed Description

DMA

Author
Kevin Laeufer
Mike Wolfram

Member Enumeration Documentation

enum modm::platform::DmaBase::CircularMode : uint32_t
strong
Enum ValuesDocumentation
Enabled 

circular mode

enum modm::platform::DmaBase::DataTransferDirection : uint32_t
strong
Enum ValuesDocumentation
PeripheralToMemory 

Source: DMA_CPARx; Sink: DMA_CMARx.

MemoryToPeripheral 

Source: DMA_CMARx; Sink: DMA_CPARx.

MemoryToMemory 

Source: DMA_CPARx; Sink: DMA_CMARx.

enum modm::platform::DmaBase::MemoryDataSize : uint32_t
strong

In direct mode (if the FIFO is not used) MSIZE is forced by hardware to the same value as PSIZE

enum modm::platform::DmaBase::MemoryIncrementMode : uint32_t
strong
Enum ValuesDocumentation
Increment 

incremented according to MemoryDataSize

enum modm::platform::DmaBase::PeripheralIncrementMode : uint32_t
strong
Enum ValuesDocumentation
Increment 

incremented according to PeripheralDataSize

enum modm::platform::DmaBase::Signal : uint8_t
strong

Peripheral signals that can be used in DMA channels

Member Data Documentation

constexpr uint32_t modm::platform::DmaBase::configmask
staticprotectedconstexpr
Initial value:
DMA_CCR_CIRC |
DMA_CCR_PL_1 | DMA_CCR_PL_0
constexpr uint32_t modm::platform::DmaBase::memoryMask
staticprotectedconstexpr
Initial value:
DMA_CCR_MSIZE_0 | DMA_CCR_MSIZE_1 |
DMA_CCR_MINC |
DMA_CCR_DIR | DMA_CCR_MEM2MEM
constexpr uint32_t modm::platform::DmaBase::peripheralMask
staticprotectedconstexpr
Initial value:
DMA_CCR_PSIZE_0 | DMA_CCR_PSIZE_1 |
DMA_CCR_PINC |
DMA_CCR_DIR | DMA_CCR_MEM2MEM
The documentation for this class was generated from the following file: